Basic Operation
The section describes the basic operation of the ConductOR.
Input Selection
Select a primary input by touching the Select Inputs icon, shown below, on the Home screen (page 9)
Touch the Identify button, a yellow number appears on each display connected to the ConductOR.
The number clears after 5 seconds. Displays connected to OUT 3 and OUT 4 will show a 3.
On the Select Display row, touch the
On the Primary row, touch the Change button.
The Primary Input screen is displayed.
On the Primary Input screen select the input and touch its button. The DVI 2 button is used for
illustration.
Touch the Go Back button on the Primary Input screen to return to the Select Inputs screen.
Touch the Go Back button on the Select Inputs screen to return to the Home screen (page 9)
Display 1
icon.
Display 1
is used for illustration.
6
16