On Screen Display Overview - NDS ConductOR User Manual

On Screen Display Overview

Select the Keypad screen as described on page 13.
On the Select Display row touch the display icon for the output whose parameters will be adjusted.
Touch the MENU button once to open the
lower left corner of the monitor connected to the selected output. The active (DISP 1:, DISP 2: or DISP
3:) output 's, primary input is shown in black at the top left of the OSD. If there is an active secondary
input, it will be shown in gray at the top right of the OSD. The four available
Picture, Color, Setup, Defaults
The OSD opens with the
button to select the menu you want to work with.
Touch the SCROLL button to select the parameter. Touch the fi or fl button to set the parameter to
the desired value. Touch the MENU button to save your changes and close the OSD. Note: Grayed
out parameters are not accessible.
7
19
On Screen Display
Picture menu displayed. The menus are shown below. Touch the fi or fl
(OSD). The OSD's default location is the
OSD menus are: