Output Settings Screen; Information Screen - NDS ConductOR User Manual

Output Settings Screen

Touch the Output Settings icon on the home screen (page 9) to display the Display
Output Settings screen.
Choose OUT 1, OUT 2, OUT 3 or OUT 4.
Select the desired output setting by touching the 720p, 1080i, 1080p or 1200 button. The 1080i
option is available for
Optic output modules. Note: If outputs 3 and 4 are
resolution cannot be set to 1200.
Touch the Go Back button to return to the Home screen.

Information Screen

Touch the Information icon on the Home screen (page 9) to display the Information
screen. This screen displays general information about your ConductOR. See the screen
shot below.
Touching the Factory Defaults button restores the ConductOR's factory settings.
Touching the Firmware Update prepares the ConductOR to receive a firmware update.
Touch the Go Back button to return to the Home screen.
SDI output modules only and the 1200 option is only available for
DVI or Fiber and SDI, then the
DVI and Fiber
DVI or Fiber output
14