Keypad Screen - NDS ConductOR User Manual

Keypad Screen

On the Select Inputs screen (page 10), touch the Keypad button to display the Keypad screen. To observe
the effect of changing an output's parameters, a monitor must be connected to the output whose
parameters are being changed. Changing the ConductOR's parameters
monitor's parameters. Note: We recommend that the connected monitor's parameters
this may degrade the displayed image.
Touch the Identify button to identify the output whose parameters are to be adjusted, then touch
the corresponding display icon to select that output.
When you touch any of the keypad buttons, the button and the LED above it turn green until you
release the button.
Touch the MENU button to open the OSD. The SCROLL and fi or fl button usage is detailed starting
on page 20.
Touch the SCROLL button to select the parameter you want to change.
Touch fi or fl to select the menu or parameter you want work with.
The Brightness / Contrast button usage is detailed on page 18.
Touch the Go Back button to return to the Select Inputs screen.
Changes made via the keypad are retained when the ConductOR's power is cycled.
13
does not change the connected
not be changed as