Pip, Swap And Disable Pip Buttons - NDS ConductOR User Manual

PIP, Swap and Disable PIP Buttons

Split Screen with
Overscan
A source should be displayed in the Primary and Secondary windows and a small PIP rectangle
appears in the upper right corner of the selected display icon. An example is shown above.
Touching the PIP + button causes the button to illuminate momentarily and the PIP size in the icon
changes. Each time the PIP + button is touched the PIP icon changes as you cycle through the PIP sizes.
Touching the PIP - button causes the button to illuminate momentarily and the PIP size in the icon
changes. Each time the PIP - button is touched the PIP icon changes as you cycle through the PIP sizes.
Touch the Swap button to exchange the text in the Primary and Secondary rows. The primary and
secondary images displayed on the attached monitor are swapped.
The secondary input may be cleared by touching the Disable PIP button.
The PIP +, PIP -, Swap and Disable PIP buttons are located on the bottom row of
the Select Inputs screen (page 10) and are effective only when a secondary input
has been selected. Select a secondary input as described on the previous page.
DVI 2
VGA
Small PIP Large PIP
Split Screen
VGA
DVI 2
Split Screen with
Overscan
Split Screen
Large PIP Small PIP
Full Screen
Full Screen
12