Table of Contents
Advertisement
Image Adjustments
Select the Keypad screen as described on page 13.
Touch this button to identify the output you want to adjust. Note: The identify function requires
that a monitor be connected to at least one of the four outputs.
On the Select Display row touch the display icon that corresponds to the output whose
brightness and / or contrast will be adjusted, connect a monitor to the output that will be
adjusted. The Keypad screen below shows output 1 selected.
Follow the
Adjust Brightness
and / or contrast of the selected output. To adjust another output, identify it, then touch its
display icon.
Touch this button to return to the Select Inputs screen (page 16)
Adjust Brightness
Adjust Contrast
and / or
Adjust Contrast
Touch the Brightness / Contrast button to display the Brightness
control menu. Touch the fi or fl button to adjust
When a
PIP
image is visible, touch the Brightness / Contrast button
again to access the
Secondary
Setting the brightness too high or too low will decrease the amount of
visible grayscales.
Touch the Brightness / Contrast button twice, three times when a PIP
image is visible, to display the Contrast control menu. Touch the fi or
fl button to adjust Primary contrast. When a
the Brightness / Contrast button again to access the Secondary
contrast control.
Setting the contrast too high or too low causes loss of some grayscales.
Color saturation may appear incorrect.
procedure, below, to adjust the brightness
brightness control.
PIP
image is visible, touch
Primary
brightness.
18
Advertisement
Table of Contents
