Streaming Video - NDS ConductOR User Manual

Streaming Video

Note: The following steps assume that you are continuing from the previous page.
Comment: In the Transmit Unit Setup section, Display 1 and the DVI-2 input are used for illustration.
Transmit Unit Setup:
Connect a DVI signal source to the Transmit unit's
(Connector Panel is shown on page 3) to a compatible display. On the Home screen (page 9), touch the
Select Inputs icon. Verify that the resolution of the selected output is 1080. (See page 14)
On the Select Display row touch the
On the Primary row touch the Change button.
The Primary Input screen is displayed. Touch the
Finally, touch the Go Back button to return to the Select Inputs screen. Verify that
Primary row window. An image of the
completes the Transmit unit setup.
Receive Unit Setup is described on the following page.
DVI-2 connector. Connect the Transmit unit's OUT 1
Display 1 icon.
DVI-2 button.
DVI signal should be shown on the connected display. This
DVI-2 appears in the
34