Ip Streaming - NDS ConductOR User Manual

IP Streaming Screen
Touch the IP Streaming icon on the Home screen (page 9) to display the IP Streaming
screen. If the
approximately 30 seconds and the IP Streaming screen will be displayed.
On the Mode row, touch Transmit to send data to the network or touch Receive to receive data from
the network. Note: When Receive mode is selected, Stream Resolution has no effect and Stream
Source is disabled.
On the Stream Source row touch Display 1, Display 2 or Display 3 to select the output whose data
will be sent to the network.
Set Stream Resolution to 1080i, 720p or 480p to match the receiving device's capabilities.
The IP Address may be set via DHCP (default) or via the ConfigOR-G2 program (page 29).
The Remote IP address is set using the ConfigOR-G2 program (page 29).
The Start button is used to establish an IP link between two ConductOR's. The text in the Remote IP
window turns green when the link is established. Note: The Start button is used
two ConductOR's together.
Touching the Private button turns the streaming video and audio on or off. The default is on.
Video and audio are on
Video and audio are off
Touch the Go Back button to return to the Home screen.
15
"Streaming subsystem is initializing" message appears, it will clear in
only for connecting