Page 1
Radiance® Ultra 4K/UHD 32" USER MANUAL ENGLISH...
Page 3
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. This document is subject to change without notice. NDS provides this information as reference only. Reference to products from other vendors does not imply any recommendation or endorsement.
This symbol alerts the user that important information regarding the installation and/or operation of this equipment follows. Information preceded by this symbol should be read carefully. This symbol alerts the user that the user manual and translated copies are published on the NDS website at: www.ndssi.com/user-manuals/ This symbol warns the user that un-insulated voltage within the unit may have sufficient magnitude to cause electrical shock.
System Safety Requirements External equipment connected to the signal input/output or other connectors of this product for use in a patient environment must comply with the requirements of ISO and UL/EN/IEC 60601-1 safety standards. A person who connects such equipment to this product has by definition formed a system, and is responsible for compliance of that system to the same ISO and UL/EN/IEC 60601-1 safety standards.
Display User Interface Display Keypad The Display Keypad is centered on the lower front surface of the display enclosure, providing controls for adjustment of display parameters using the On Screen Display (OSD) Menu system. OSD Menu Overview The OSD Menu provides controls divided into 4 categories: the Picture Menu, the Color Menu, the Setup Menu, and the Input Menu.
OSD Menu Access the OSD Menu by tapping the MENU button. The OSD Menu opens displaying the Picture Menu, with details of the input listed across the top of the menu above the menu tabs. Operating Hours and Firmware version number are listed left and right respectively at the bottom of the menu. To select other menu tabs, tap the buttons to highlight a menu tab, then tap the SCROLL button to enter the menu.
Page 11
Rotation The rotation option rotates the orientation of the screen per the option selected. To select the screen orientation, tap the buttons. Off: No screen orientation change. 180: Rotates the screen 180°. V-Flip: Rotates the screen vertically 180°. H-Flip: Rotates the screen horizontally 180°. Rotation OSD The rotation OSD option displays the screen orientation indicator on the screen at the selected interval.
Color Correction To select a color correction setting, tap the buttons. NDS: Bypasses the color correction feature. BT.709: Factory calibrated to meet the BT.709 standard. BT.2020: Factory calibrated to emulate the BT.2020 standard. Auto Color Correction To select Auto Color Correction (On or Off ), tap the buttons.
Setup Menu Menu Position: To select from 4 preset screen locations for display of the OSD menu, tap the buttons. Language: To select one of eight languages: English, Deutsch, Français, Italiano, Svenska, Español, Nederlands, or Pycckий, tap the buttons. DPMS Enable To enable or disable Display Power Management System (DPMS), tap the buttons.
Input Menu Note: Some options may not be available on the 90R0132. Open the Input Menu directly by tapping the INPUT button. Input Menu Overview The Primary image is designated by selection of an input. -SDI and 3D Option 3D Signal Format The following settings are available for SDI, HDMI-2, and DVI-2 inputs on the 3D display configuration only: None (2D): Select this option if the incoming signal is either preprocessed 3D at UHD Line-by-Line format or a standard two dimensional image and not three dimensional.
DVI–Out DVI-D DisplayPort Service 1 USB Mini B HDMI Type A DC Input XLR, Neutrik type Radiance Ultra 4K/UHD Connector Panel - 12G-SDI (90R0123 and 90R0125) 12G-SDI Configuration RS-232 SERVICE 1 DISPLAYPORT HDMI DVI-IN DVI-OUT DC INPUT DVI-2 IN DVI-2 OUT...
Electrical Symbols Equipotentiality This symbol appears next to the display Potential Equalization Conductor (ground post). Closed (On) Switch This symbol appears on the closed, or on, side of the display On/Off switch. Open (Off) Switch This symbol appears on the open, or off, side of the display On/Off switch. Cable Bend Radius We recommend that the bend radius of metallic cables be no less than 2.5 inches (63 mm) or 7 times the diameter of the cable whichever is greater.
Specifications Specifications are subject to change without notice. Contact your regional NDS headquarters for current specifications using contact information on the back cover. 90R0123 90R0125 90R0132 Viewing Area (Diagonal) 31.50" (801 mm) 32.00" (812.8 mm) 31.50" (801 mm) Viewing Angle (Horizontal and 178°...
Installation and Maintenance VESA Mounting This monitor is compliant with the VESA Mounting Interface Standard, with 100 x 100 mm and 200 x 100 mm MIS hole mount patterns, suitable for stand or boom mounting. Warning: Mounting bracket screws must be securely tightened. Failure to properly secure the mounting bracket to the display could be hazardous.
Electromagnetic Compatibility Tables All medical electronic devices must conform to the requirements of IEC 60601-1-2. Precautions, adherences to the Electromagnetic Compatibility (EMC) guideline information provided in this manual and verification of all medical devices in simultaneous operation are required to ensure the electromagnetic compatibility and co- existence of all other medical devices prior to a surgical procedure.
Electromagnetic Emissions Emissions Compliance Electromagnetic environment-- guidance RF emissions Group 1 The product uses RF energy only for its internal function. Therefore, its RF emissions are very low and are not likely to cause any interference in nearby CISPR 11 electronic equipment.
Electromagnetic Immunity Guidance and Manufacturer’s Declaration: Electromagnetic Emissions The product is intended for use in the electromagnetic environment specified below. The customer or the user of the product should assure that it is used in such an environment. Immunity Test Immunity Test Electrostatic discharge (ESD) IEC 61000-4-2 ±2, ±4, ±6, ±8kV contract discharge...
Recommended Separation Distances Recommended separation distances between portable and mobile RF communications equipment and the product The product is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the product can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the product as recommended below, according to the maximum output power of the communications equipment.
Terms and Conditions Declarations of Conformity FCC and Council Directives of European Standards This device complies with Part 15 of FCC rules and 2017/745 Medical Device Regulation of European Union. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable results.
NDS neither assumes nor authorizes any person to assume for it any other liabilities in conjunction with and/or related to the sale and/or use of its products. To ensure proper use, handling and care of NDS products, customers should consult the product specific literature, instruction manual, and/or labeling included with the product or otherwise available.
Page 30
+81 3 5753 2466 info@ndssi.com Oriental Media Center Suite 2302, Tower C No.4, Guang Hua Road Chao Yang District Beijing, 100026 China +86 10 8559 7859 info@ndssi.com NDS Quality System ISO 13485 FDA Registration #2954921 February 2021 60A1071 Rev B...