Front Panel Operation; Home Screen - NDS ConductOR User Manual

Front Panel Operation

Home Screen

The Home screen, shown below, is the starting point for all front panel operations. The icons on the home
screen and their functions are briefly described below and described in greater detail on the following
pages.
Select Inputs
Touch this icon to open the
Information
ConductOR's factory defaults or update the scalar firmware. Touch this icon to open the
Information
IP Streaming
connection to be effective. Touch this icon to open the
15.
Output Settings
output modules 3 and 4 are DVI or Fiber and SDI then the output resolution is limited to
720p or 1080p for the DVI or Fiber output. The SDI output may be set to 720p, 1080p or 1080i.
Touch this icon to open the
9
Allows the user to select an output and its primary and / or secondary input.
Select Inputs
Provides information about the ConductOR. The user may restore the
screen shown on page 14.
This screen is associated with network operations and requires a network
Provides a means to set the output resolution of each module. Note: If
Output Settings
screen shown on the following page.
IP Streaming
screen shown on page 14.
screen shown on page