Key Entry - ABB CEMcaptain GAA610-M Operating Instruction

52 GAA610-M ADVANCED EMISSION GAS MONITORING SYSTEM | OI/GAA610-M-EN REV. B
• The LCD display will now display an entry field to change the
parameter value.
Figure 32: Change parameter value (Example)
2. Enter the new value using the numeric keypad and then press
the 'ENTER' to accept it.
Setup
The value input can be configured individually on the user pages,
for detailed information, see Chapter 'Configuration' in the
operating instruction OI/AO2000.
... 11 Operation
... Selecting and changing parameters

Key Entry

Using the key entry, preset parameter values can be selected
directly using the softkeys.
Numbers on the keyboard are assigned to the individual
parameters; the assignment is specified above the respective
parameter (e.g.: 'Press key <4>').
The parameter is called up for editing by pressing the assigned
number key.
Example
Figure 33: Select parameters
1. Press the '4' button to call up the parameter for editing.