Table of Contents
Advertisement
50
GAA610-M ADVANCED EMISSION GAS MONITORING SYSTEM | OI/GAA610-M-EN REV. B
... 11 Operation
... LCD indicator
The Softkeys in Menu Mode
In menu mode, a series of softkeys appears on the softkey line,
whose labeling and therefore function change based on the
situation.
Their descriptions and functions depend on the specific
situation.
Softkey
Description
The operator uses the arrow keys to move the selection cursor
up or down, e.g. in menus or lists to choose vertically arranged
(menu) items.
The menu item selected is reversed, i.e. appearing as bright
characters on a dark background.
The operator uses the arrow keys to move the selection cursor
left or right, e.g. into or out of a submenu or to select (menu)
items arranged next to each other.
The menu item selected is reversed, i.e. appearing as bright
characters on a dark background.
The operator can use the 'BACKSPACE' button to delete
characters to the left of the cursor (as on a PC keyboard).
The operator can use the 'CLEAR' button to delete all characters
in a selected field.
The operator can use the 'ENTER' button to call up menu items
for editing, trigger functions, confirm inputs, e.g.
parameterization.
The 'ENTER' button is always at the right margin of the softkey
line.
The operator can use the 'HELP' button to access context-
sensitive help. The screen will then show a help message
explaining the menu item selected.
The operator can use the 'Back' button to clear the help text.
Presentation of entries in this Operating Instruction
In this operating instruction, entries to be made by the operator
will not be identified by key symbols but by the following type
styles (these are examples only):
Press cancel keys:
'Back', 'Meas'
„MENU", „HELP", „ENTER",
Press softkeys:
„BACKSPACE"
Select menu items:
„Calibration Data", „Configure"
Enter numbers:
'0' to '9'
Entering text
When text, such as sample components or user names, needs to
be entered an 'image' of the numeric keypad appears on the
screen.
The following characters are shown using a total of four pages:
•
Letters A to Z and a to z
•
Special characters * ( ) % & : < > / and spaces
•
Digits 0 to 9
Each character is accessed using the button in the
corresponding position on the numeric keypad. Examples:
Letters:
A
L
Button:
7
-
An input line appears at the lower edge of the screen for new
text to be entered or existing text to be modified.
Text is entered and modified in two ways:
•
The operator enters text in input mode.
•
The operator modifies already entered text in edit mode.
Softkeys in input mode
The softkeys in the input mode have the following functions:
Button
Description
The 'PREV PAGE' and 'NEXT PAGE' buttons allow the operator to
move to the previous or next keypad page.
The 'CAPS' button allows the operator to switch between
uppercase and lowercase letters.
The 'EDIT' key allows the operator to switch into edit mode.
Softkeys in Edit Mode
The softkeys in the edit mode have the following functions:
Button
Description
The two arrow keys allow the operator to move the cursor left
and right in the entry line.
The operator can use the 'BACKSPACE' button to delete
characters to the left of the cursor (as on a PC keyboard).
The 'INPUT' button allows the operator to switch to entry mode.
t
Blank or space
character
2
9
Advertisement
Table of Contents
