Table of Contents
Advertisement
58
GAA610-M ADVANCED EMISSION GAS MONITORING SYSTEM | OI/GAA610-M-EN REV. B
12 Diagnosis / Troubleshooting
Safety instructions
WARNING
Risk of injury
Risk of injury due to improperly performed error correction.
The remedial measures described in this chapter require
special knowledge and may require work to be done on the
gas analyzer while it is open and under voltage!
•
Work on the gas analyzer may only be performed by
qualified and specially trained personnel!
The Dynamic QR Code
Application
Dynamic QR Code is a unique feature for displaying dynamically
generated QR codes on the gas analyzer display.
The QR code displayed contains static system information as
well as dynamically generated information regarding system
configuration and the status of the gas analyzer.
Static data for the identification of the device includes, for
example:
•
Manufacturing number
•
Production date
•
Software version
•
Serial numbers of the analyzer modules and assemblies
that have been installed
Dynamic data for diagnostic purposes in the case of a fault
include, for example:
•
Status Messages
•
Measured values
•
Temperature, pressure and flow-rate values
•
Drift values
•
Analyzer-specific values
In combination with mobile devices (smartphone, tablet, etc.),
Dynamic QR Code represents an innovative communication path
for the user, enabling improved, case-specific assistance from
the ABB service team.
This helps to shorten response times in the event of a fault,
thereby increasing the availability of your gas analyzers.
Dynamic QR Code is compatible with both the ABB app "my
Installed Base" and standard QR Code scanner apps
Handling
The QR code is accessed in the Diagnostic Menu of the gas
analyzer and indicated on the display.
The QR Code Scanner App installed in the mobile device scans
the QR Code that is displayed. The text information that is then
displayed on the mobile device is sent to the local service
contact specified in the "Measurement Care" contract, by email
or other means of transmission.
Alternatively, it is possible to take a photograph of the displayed
QR code and send the photograph to the service contact.
Dynamic QR-Code Accessing
Menu Path
'Menu/Diagnosis/Information/QR Code display'
Procedure
1. Select system overview or the required analyzer module.
2. Access the QR code by pressing ENTER.
3. Scan QR code.
4. Return to the menu selection by clicking on Back.
Recommended QR code scanner apps
ABB recommends using the following QR code scanner apps
(available free of charge for iOS and Android devices):
"my Installed Base" from ABB
iOS App Store
"QR Scanner" from Kaspersky
iOS App Store
Google Play
Google Play
Advertisement
Table of Contents
