13 Maintenance; Safety Instructions - ABB CEMcaptain GAA610-M Operating Instruction

Advanced emission gas monitoring system for marine applications
Table of Contents

Advertisement

GAA610-M ADVANCED EMISSION GAS MONITORING SYSTEM | OI/GAA610-M-EN REV. B

13 Maintenance

Safety instructions

WARNING
Risk of injury
Risk of injury due to maintenance work being carried out
incorrectly.
The work described in this chapter require special knowledge
and may require work to be done on the gas analyzer while it
is open and under voltage!
Maintenance work on the gas analyzer should be
performed by qualified and specially trained personnel
only !
WARNING
Risk of injury due to harmful gases
Some of the gases measured with the analyzer system are
harmful to health.
Therefore, the sample gas must not escape from the gas path
during normal operation and maintenance works.
A seal integrity check of the analyzer system has to be
performed at regular intervals.
CAUTION
Risk of injury due to corrosive condensates
Condensates are often corrosive.
When working with corrosive reagents note the hazard
information and safety precautions contained in the
applicable material safety data sheets.
Neutralize condensates and follow the prescribed
measures for disposal.
71

Advertisement

Table of Contents
loading

Table of Contents