ABB CEMcaptain GAA610-M Operating Instruction page 65

GAA610-M ADVANCED EMISSION GAS MONITORING SYSTEM | OI/GAA610-M-EN REV. B
No. Text
User-Configured Messages
800 An external error occurred during:
801 A user-defined error occurred during:
802 A user-defined maintenance request occurred
during
803 A user-defined maintenance mode event
occurred during:
Miscellaneous Messages
1000 This function block has an error:
1001 Condensate penetration.
1002 Flow rate too high at this point!
1003 Flow rate too low at this point!
System Cooler
1100 Cooler temperature too high.
1101 Cooler temperature too low.
1102 Condensate penetration in cooler.
1103 Flow rate too low in cooler.
1104 Cooler condensate level too high.
1105 Cooler condensate level too high.
1106 Cooler reagent level too low.
S A W F Reaction/Remark
x x Default texts for the Message Generator function block are supplemented with the
full text defined during function block configuration.
x x
x
x
x x Is supplemented with a reference to the function block type.
Overall message for guiding reaction to condensate penetration; not logged
x x Currently not used
x x Currently not used
x x Sample gas feed module pump is automatically turned off. Check the system cooler
and sample gas preparation system.
x x
x x
x Check the system cooler and sample gas preparation system.
x
x Empty the condensate bottle.
x Fill the reagent container.
65