Figure 11 Removing the Gasket
Reinstalling the Cover Assembly
Figure 12 Placing the Maincase Gasket
Guide pin
Figure 13 Placing the Cover Assembly
TRU/FLO Compound Meter Installation and Maintenance Guide
7
Use a flat scraper to remove the old gasket from the maincase and
to avoid damaging the maincase. See Figure 11.
Complete the following steps to re-install the cover assembly.
1
Place the maincase gasket on the maincase. See Figure 12
The maincase gasket does not need to be secured with any
adhesive.
2
Place the cover assembly on the maincase, making sure that the
cover assembly aligns with the guide pins. See Figure 13
Maintaining the TRU/FLO Compound Meter
.
.
15