Table of Contents
Advertisement
Throttle valve assembly
Figure 42 Removing the Throttle Valve Assembly
Replacing the Throttle Valve Assembly
Main valve assembly
Figure 43 Placing the Throttle Valve Assembly
TRU/FLO Compound Meter Installation and Maintenance Guide
3
Remove the throttle valve assembly by lifting and holding the flap,
then pushing down on the valve. See Figure 42.
Flap
To replace the throttle valve assembly, complete the following steps.
1
Place the throttle valve assembly in the maincase with the flap
toward the main valve assembly. See Figure 43.
The main valve assembly keeps the flap closed.
2
Lift the throttle valve up and place the snap ring in the throttle valve
groove.
Throttle valve flap
Maintaining the TRU/FLO Compound Meter
The snap ring locks the throttle valve assembly in place and
can be reused.
25
Advertisement
Table of Contents
