Table of Contents
Advertisement
Appendix A: Strainer Cleaning and Maintenance
Cleaning the Strainer
TRU/FLO Compound Meter Installation and Maintenance Guide
This section provides information on how to clean and maintain the TRU/FLO strainer.
To clean the strainer, complete the following steps.
1
First remove the cover.
2
Pull the metal strainer out of the body and clean off any build up of debris.
3
If there is any debris in the strainer body, clean out the debris.
4
Replace the gasket between the cover and the body if necessary.
Figure 50 External Strainer
31
Advertisement
Table of Contents
