Replacing The Transmitter Cover - Neptune R450 User Manual
Wall and pit arb utility management systems water electric gas
Hide thumbs
Also See for R450:
- Customer manual (114 pages) ,
- Installation and maintenance manual (62 pages) ,
- Quick install manual (24 pages)
Table of Contents
Advertisement
Replacing the MIU Battery (Wall and Pit)
Figure 14 Returning Spliced Battery to Main Housing
12
5
Snap the battery casing into the receiving clips on the main
housing. See Figure 14.
6
Reactivate the MIU as shown.
Replacing the Transmitter Cover
1
Secure the transmitter cover using the two Phillips head
screws, until the cover is snug and fully seated.
Be careful not to pinch the battery wires between
the cover and the housing.
2
Replace the pit lid.
R450 Wall and Pit MIU User's Manual
Advertisement
Table of Contents
