Table of Contents
Advertisement
Figure 17 T-10 Plate Gasket
T-10 strainer
Figure 18 Removing the T-10 Strainer
T-10 chamber
Figure 19 Removing the T-10 Chamber
TRU/FLO Compound Meter Installation and Maintenance Guide
3
Inspect and remove the T-10 plate gasket. See Figure 17.
4
Insert the flathead screwdriver under the T-10 strainer, then lift to
remove the strainer. See Figure 18.
The T-10 strainer can be reused if it is not damaged.
5
Insert the flathead screwdriver under the T-10 chamber after the
strainer is removed, then lift to remove the chamber. See Figure 19.
6
Inspect the chamber for any damage, and if necessary discard the
chamber.
Breaking down and rebuilding individual components in the
chamber is not recommended.
Maintaining the TRU/FLO Compound Meter
17
Advertisement
Table of Contents
