Rating Plate & Markings On The Product; Commissioning And Handover; Introduction To The Product And The Surroundings - Proactive TRAVELER Service Booklet

Table of Contents

Advertisement

TRAVELER usage instructions
9
Rating plate & markings on the
product
The rating plate is located on the product
frame. The rating plate includes the precise
model, the serial number and other technical
specifications.
When contacting your rehabilitation specialist
dealer or PRO ACTIV with regard to your prod-
uct, please always have the serial number and
year of construction on the rating plate at hand.
CE marking
"European conformity"
Medical device
Manufacturer
Follow the usage instructions
Serial number
Date of manufacture
The product is labelled with further symbols
(stickers):
Product not approved as a seat
in motor vehicles
Product approved as a seat in
motor vehicles; marking of the
transport restraint system con-
nections on the wheelchair or
fastening points for wheelchair
restraint systems
More detailed information about this can be
found in Chapter 28.

10 Commissioning and handover

The product will be handed over to you ready
for use by a rehabilitation specialist dealer or a
field representative or by a product consultant
from PRO ACTIV.
You will be fully instructed in the use of the
product based on the usage instructions in-
cluded in the delivery. You will be handed over
a record of training and handover certificate as
written proof. In addition, you will be handed
the usage instructions and, if necessary, fur-
ther accessories for your own use. It is recom-
mended that you take along an assistant to the
training so that, if required, they can assist you
later when handling the product.
During the hand-over, the record of training
(Chapter 39) and the hand-over certificate in-
cluding the associated check list (Chapter 40)
must be filled in. The rehabilitation specialist
dealer should send the completed documents
to PRO ACTIV for filing as a file by e-mail or in
the form of a copy by fax or in the post.
11 Introduction to the product and
the surroundings
During the initial commissioning of the product,
drive at minimum speed and become accus-
tomed to the driving characteristics of the prod-
uct. Always adapt the speed and driving ma-
noeuvres to match your own abilities and ex-
ternal circumstances. You will get a feel for
how to use the product safely after a short
time. Before driving up or down slopes or hills
with the product, you should be proficient in the
safe handling of the product on level ground.
Practice bending over, gripping, stretching and
getting out, until you know the limits of your
abilities. Allow yourself to be assisted until you
know what can cause falls or tips and how to
avoid it.
8

Advertisement

Table of Contents
loading

Table of Contents