Marking; Fastening The Wheelchair In The Vehicle - Proactive TRAVELER Service Booklet

The occupant restraint system comprises:

Lap belt with lock (e.g. manufacturer
Schnierle Safety Belts GmbH).
Figure 153: Hip strap with lock, the fittings for con-
necting the transport restraints and two belt links for
the selective securing of the diagonal shoulder belt

Diagonal shoulder belt with lock head (e.g.
manufacturer Schnierle Safety Belts
GmbH).
Figure 154: Automatic diagonal shoulder belt with
deflector and buckle

Headrest with padding including sturdy
bracket.
The use of a headrest is recommended, as
it offers better protection during travel
when used properly.
Figure 155: Headrest (example)
55
TRAVELER usage instructions

28.3 Marking

Wheelchairs tested according to ISO 7176-19
and approved for transporting passengers in
motor vehicles are marked with the following
karabiner symbol:
Figure 156: Karabiner symbol/sticker for a tested
wheelchair approved for transporting passengers in
motor vehicles
28.4 Fastening the wheelchair in the
vehicle
Information about the fastening points for
wheelchairs with and without transport restraint
system is provided in the following.
Fastenings for wheelchairs with transport re-
straint system: the transport restraint system
connections on the product (transport restraint
system connection on the rear frame and bear-
ing block intermediate plate) are marked with
the above mentioned karabiner symbol.

Transport restraint connection on the rear
frame: The frame-welded part can be used
for installing the mount for the hip strap as
well as for fixing the buckle that joins the
rear retractor with the vehicle.
Figure 157: Transport restraint system attachment
on the rear frame with belt link for rear retractor and
lap belt