Table of Contents
Advertisement
TRAVELER usage instructions
Lock the folding mechanism again after you
have passed through narrow space (Chapter
17.1). The seat cover must be relieved for this
purpose.
17.3 Safety instructions
After passing through narrow space (fold-
ing in) and before using the product after being
folded together, the folding mechanism must
be properly locked again (Chapter 17.1), other-
wise the backrest and the footrest will have lat-
eral play.
Sand, dirt and salt may make the folding
mechanism sluggish or render it inoperable.
For this reason, make sure that is cleaned reg-
ularly according to Chapter 32.
If the folding mechanism has jammed or
does not function correctly, you should contact
your rehabilitation specialist retailer or PRO
ACTIV before using it again.
18 Individual setting options
The following instructions are intended
for and may only be carried out by a rehabilita-
tion specialist dealer or PRO ACTIV
18.1 Adapting the seat height at the
back
The product is equipped with a wheel plate,
which enables seat height adjustment. The
product is generally equipped with a 2-slot
wheel plate. With this equipment, the seat
height can be adjusted at the rear by a total of
6 cm.
Wheel plate (front side)
Drive wheel bushing
Figure 6: 2-slot wheel plate for rear seat height ad-
justment (view from outer side of product, drive
wheel removed)
Figure 7: 2-slot wheel plate for rear seat height ad-
justment (view from inner side of product, drive
wheel removed)
In order to adjust the seat height at the rear,
first remove the drive wheels via the quick re-
lease axles (see Chapter 22.1), so that you
have direct access to the wheel plates. Now,
there are the following options.
18.1.1 Mounting the drive wheel bushing
in the other wheel plate slot
If the drive wheel bushing is initially
mounted in the lower slot of the wheel
plate, the rear seat height can be reduced
by 3 cm by mounting it in the upper slot.
If the drive wheel bushing is initially
mounted in the upper slot of the wheel
plate, the rear seat height can be in-
creased by 3 cm by mounting it in the
lower slot.
Upper slot
of the wheel
plate
Lower slot
of the wheel
plate
Wheel plate
(rear side)
14
Advertisement
Table of Contents
