Proactive TRAVELER Service Booklet page 47

TRAVELER usage instructions
Figure 125: Passive position of anti-tipping support
(view from the rear)
To move the anti-tipping support into the
operating position, press the anti-tipping bar
downwards and swivel this to the rear. Make
sure that the anti-tipping support is engaged
correctly again. This is visible when the foot-
step pins have engaged in the corresponding
recess of the anti-tipping support adapters
from the one side and the M6 fixing screw from
the other side.
Recommendation:
An accompanying person can also press the
anti-tipping support downwards by stepping on
the footstep pin and then swivelling it into the
operating position.
Press the anti-tipping
bar downwards and
swivel to the rear
Figure 126: Moving the anti-tipping support to oper-
ating position (view from the rear)
Footstep pins
M6 fixing screw
engaged in the
recess of the
anti-tipping
support adapter
Figure 127: Anti-tipping support engaged correctly
To move the anti-tipping support into the
passive position, press the anti-tipping bar
downwards and swivel this to the inside under-
neath the seating area. Make sure that the
anti-tipping support is engaged correctly again.
This is visible when the footstep pins have en-
gaged in the corresponding recess of the anti-
tipping support adapters from the one side and
the M6 fixing screw from the other side.
Recommendation:
An accompanying person can also press the
anti-tipping support downwards by stepping on
the reinforcement plate and then swivelling it
into the passive position.
Press the anti-tipping bar
downwards and swivel inwards
underneath the seating area
Reinforcement plate
with stepping option
Figure 128: Moving the anti-tipping support to pas-
sive position (view from the rear)
46