Ergonomic Back Shell & Its Setting Options - Proactive TRAVELER Service Booklet

Table of Contents

Advertisement

TRAVELER usage instructions
Figure 41: Step 5: Returning the belt through the
tensioning loop to obtain the required "double pas-
sage"
Figure 42: Step 6: Pulling the belt through for the
double passage
Leave the loop
Figure 43: Step 7: Double passage
Figure 44: Step 8: Threading in the belt
Figure 45: Step 9: The belt has been fully threaded
19.3 Ergonomic back shell & its setting
options
The "ergonomic back shell" back system con-
sists of an aluminium shell, Velcro cross-straps
and back padding.
Slack is already integrated into the back shell
due to its shape. It cannot be adjusted.
However, lumbar support can be adjusted in-
dividually using the Velcro cross-straps. For
this purpose, the back padding is removed
over the Velcro straps. The cross-straps can
now be tensioned according to the individual
requirements by releasing and refastening the
Velcro strap system.
Figure 46: Ergonomic back shell (view from behind)
Then mount the back padding using the Velcro
straps.
24

Advertisement

Table of Contents
loading

Table of Contents