Clothing Guard Size - Proactive TRAVELER Service Booklet

TRAVELER usage instructions
M5 fixing screws
Slots of the
mounting bar
Figure 62: M5 fixing screws and slots on the mount-
ing bar
Now the mounting bar can be brought into po-
sition using the slots of the clothing guard and
the mounting bar.
Finally the clothing guard mounts are posi-
tioned accordingly and the M5 fixing screws
(AF 3 mm) are screwed back into the clothing
guard mounts with 6 Nm.
Slots of the clothing guard
Figure 63: Slots of the clothing guard

21.4 Clothing guard size

The following instructions are intended
for and may only be carried out by a rehabilita-
tion specialist dealer or PRO ACTIV
The clothing guard (aluminium and carbon) is
available in three different sizes. The dimen-
sions of the wheel arches differentiate with the
different sizes:
30 mm (size 1), 36 mm (size 2),
46 mm (size 3).
Dimensions of the
wheel arches
Figure 64: Dimensions of the wheel arches
The size of the clothing guard can be read-off
the notches on the bottom edge of the clothing
guard. One notch means size 1, two notches
mean size 2 and three notches mean size 3.
Size marking for size 2
Figure 65: Size marking on the clothing guard
After changing to a wider tyre size or after
changing the wheel camber, it may be neces-
sary to change to another clothing guard size.
Where required, such a change may be ar-
ranged by your rehabilitation specialist dealer.
28