Proactive TRAVELER Service Booklet page 24

Pull the rear loop part
to the left
Figure 35: Then re-apply the tensioning loops back
on the back system
Figure 36: Tensioning loops applied slightly to the
back system
Then re-mount the back padding using the
fleece hook-and-loop straps.
If the belt should have mistakenly been
threaded out during the adjustment, see the
following figures for threading the belt in cor-
rectly:
Figure 37: Step 1: Threading in the belt
23
TRAVELER usage instructions
Figure 38: Step 2: Threading in the belt
Figure 39: Step 3: Pulling the belt through
Figure 40: Step 4: Simple threading in of the belt
through the tensioning loops
The belts must always be threaded
through the tensioning loops twice as other-
wise the belts will slacken when using the
product and with heavy loads, and the middle
web of the tensioning loops will sag signifi-
cantly.