Re-Use; Warranty - Proactive TRAVELER Service Booklet

(this may also include the cleaning or disinfec-
tion of the product before the disposal).
In the following text, you will find a description
of the materials for the disposal and recycling
of the product and its packaging:
Aluminium: Frame, rims, caster forks, brakes,
back cross bar, side sections, clothing guard,
armrest frame, footrest, footplate support, push
handles
Steel: Fastening points, quick-release/screwed
axles, push handles, anti-tipping supports,
brakes, armrest frame, screws, nuts
Plastic: Handles, quick release levers, tube
plugs, caster wheels, armrest padding, tyres,
footplate support, side sections, brake lever,
anti-tipping wheels, bags for packing
Synthetic fibres and foam: Padding, covers
Cardboard/paper: Packaging

35 Re-use

If your product has been provided to you by
your funding provider and you no longer re-
quire it, you should report this fact to your
health insurance company or your rehabilita-
tion specialist dealer. Your product can then be
simply and economically re-used.
Prior to each re-use, a technical safety check
must be carried out on the product at PRO AC-
TIV or the rehabilitation specialist dealer. In
faddition to the instructions contained in Chap-
ter 32 (Cleaning and care), a thorough clean-
ing of all control elements must be carried out
before using it again.
Before the product can be reused, it must be
prepared with care. A disinfection agent that is
suitable for medical products must be sprayed
onto all surfaces that the user may come into
contact with. A liquid, alcohol-based disinfect-
ant for residue-free, quick disinfection (e.g. Ex-
porit 4712) must be used for this, and the re-
spective instructions for use of the disinfectant
must be observed. In general, a complete dis-
infection cannot be guaranteed on the seams.
We therefore recommend that you dispose of
the seat and backrest upholstery.
63
TRAVELER usage instructions
These preparations will be performed by
PRO ACTIV or the rehabilitation specialist
dealer as part of the technical safety check.
This safety-related check must be initiated by
the funding provider.
Moreover, in event of wear or due to adapta-
tion to the new user, components such as the
footrest, seat and back system can be adjusted
or replaced using the modular system. In addi-
tion, the backrest angle is usually adjustable in
seven stages, therefore enabling optimum ad-
aptation.

36 Warranty

PRO ACTIV guarantees that the product was
free of any defects at the time it was handed
over. This warranty expires 24 months after the
product was delivered.
Further information can be found in PRO AC-
TIV's general terms and conditions at
www.proactiv-gmbh.com.
The warranty shall be null and void if the prod-
uct or a part needs to be repaired or replaced
due to the following reasons:

Normal wear on components such as tyres
of caster wheels & drive wheels, anti-tip-
ping wheels, handles, brake pins, uphol-
stery of seat and back systems, etc.

The product has not been maintained and
serviced in accordance with the mainte-
nance schedule laid down by PRO ACTIV.

The product or a part of the product has
been damaged due to neglect, accident, or
improper use.

The product has been commissioned and
used in non-compliance with these usage
instructions.

Repairs or other work have been carried
out by non-authorised persons.

Third-party parts have been installed or
connected to the product or the product
was otherwise modified.