Table of Contents
Advertisement
Simrad GC80/85 Dual MK2 Gyro Compass
5.8
Replacing the Fuses
WARNING
F1 (12 A)
FUSE NO
CAPACITY
XF101
6.3 A
XF102
10 A
FUSE NO
CAPACITY
XF101
6.3 A
XF102
10 A
988-12720-002
Before a fuse is replaced, disconnect the respective power
for the damaged fuse.
Use the procedures described on the following pages when replacing the
fuses.
Master compass
Fuse F1 is located inside the fuse holder in the front of the Master compass.
1
Open the fuse holder by pressing and turning the fuse holder edge
counter-clockwise with a screwdriver.
2
Replace fuse F1, and close the holder by turning it clockwise.
GC80/85 Dual MK2 Control unit
For location of the fuses, refer to the drawing on the next page.
CTERM No.1
TB-NO
SIGNAL
TB101-1
TB101-3
CTERM No.2
TB-NO
SIGNAL
TB101-1
TB101-3
DESCRIPTION
Gyro no.1 Main power supply (AC100/220 V)
Gyro no.1 Emergency power supply (24 V DC)
DESCRIPTION
Gyro no.2 Main power supply (AC100/220 V)
Gyro no.2 Emergency power supply (24 V DC)
38
Advertisement
Table of Contents
