Table of Contents
Advertisement
DISP
ACK
ENT
DIM
ACK
ENT
17
Automatically turn OFF the light in the Change over
panel
The back light in the Change over panel can be turned OFF automatically
after a set time.
1
Press the DISP button on the Change over panel until
- PARAMETER SET -
-PARAMETER SET:
2
Press the ACK/ENT button. The display will change to:
SET=ENT ESC=DISP
LCD CONTRAST
3
Press the ARROW UP button. The display changes to:
SET=ENT ESC=DISP
LIGHT OFF TIME
4
Press the ACK/ENT button again to activate the illumination setting
display:
SET=ENT ESC=DISP
TIME: 01.0(min):
5
Use the ARROW buttons to increase or decrease the time setting.
Range: 0 - 10 minutes.
If the value is set to 0, the back light is not turned OFF.
6
Confirm the entry by pressing the ACK/ENT button.
: is displayed in the display's upper line.
OPERATION
988-12720-002
Advertisement
Table of Contents
