Simrad GC80 Dual MK2 User Manual page 134

Simrad GC80/85 Dual MK2 Gyro Compass
JUMPER DEFAULT
J8
3-4 short
(2TX)
J9
3-4 short
(ALCN)
J10
3-4 short
(RNCN)
J11
1-2 short
(OPCN1)
J12
1-2 short
(OPCN2)
J13 1-2 short
(ENC) 3-4 short
J15 1-2 open
(FOG) 3-4 open
J16
1-2 short
(R3SEL)
988-12720-002
FUNCTION
Serial signal output
setting
Alarm contact setting
Running contact setting
Not used
Encoder signal setting
Encoder signal setting
Not used
DESCRIPTION
Output port: GTERM-A board, "2TX"
1-2 Short = IEC61162-2 ed.1
3-4 Short = IEC61162-1 ed.4
Ref. page 3.
NOTE: Never use both
jumpers at the same
time!
Output port: GTERM-A board,
"ALCN"
1-2 Short = Normal "CLOSES"
Alarm "OPEN"
3-4 Short = Normal "OPEN"
Alarm "CLOSES"
NOTE: Never use both
jumpers at the same
time!
Output port: GTERM-A board,
"RNCN"
1-2 Short = Running "CLOSES",
Stop "OPEN"
3-4 Short = Running "OPEN",
Stop "CLOSES"
NOTE: Never use both
jumpers at the same
time!
Not used
Encoder signal (GC80/85)
Encoder signal (GC80/85)
Not used
120