Cabling - Simrad GC80 Dual MK2 User Manual

Note!
6.3

Cabling

Note!
47
The foam rubber should be kept for re-use if the Master compass has to be
sent to factory for service!
No cables are included when the Gyro system is delivered from factory.
The wiring diagrams on page 88 onwards include cable specifications for
all cables.
Connect power and signal cables according to the wiring diagrams on
page 88 onwards.
To avoid cables to loosen due to vibration, the cables could be fastened to
the fixing device using wire strips as illustrated in the figure.
INSTALLATION
988-12720-002