Testing The Me70 Operational Functionality; Assembling The Me70 Multibeam Scientific Echo Sounder To Turn It On - Simrad ME70 Instruction Manual

Hide thumbs Also See for ME70:

Table of Contents

Simrad ME70 Factory Acceptance Test

Testing the ME70 operational

functionality

Topics

Assembling the ME70 Multibeam scientific echo sounder to turn it on, page 24

Testing the serial interfaces on the Processor Unit, page 26

Testing the receiver channels with the BITE Matrix functionality, page 27

Testing the transmitter channels with the BITE Matrix functionality, page 29

Measuring the power supply output voltages in the Transceiver Unit, page 31

Recording raw data, page 35

Assembling the ME70 Multibeam scientific

echo sounder to turn it on

Prior to testing the ME70, the complete system must be assembled and turned on.

Prerequisites

You need the following equipment:

• All ME70 system units

• Dummyloads

• ME70 Installation Manual

• ME70 Reference Manual

Observe the cabling and assembly instructions in the ME70 Installation manual. See

the power-up procedure in the ME70 Reference Manual. A selection of basic operating

307958/H

Table of Contents