Table of Contents
Advertisement
NH-2700
6.2 System Installation
Unpacking
1) Unpack the machine on top of the palette.
2) Cut the straps that are fastened around the box with a knife. (refer to Fig. 6.1)
(Be careful when cutting the straps.)
3) Use an appropriate tool to remove the nails from the palette. (refer to Fig. 6.2)
4) Remove the lid, then box from the top. Do not discard the packaging materials until you have
verified any shipping damage claim. Contact your distributor immediately if you see any shipping
damage. Store the box in a safe place to re-use or discard of appropriately.
5) Verify the contents carefully with the packing list to be sure all items listed are included. Notify
your distributor of any shortages.
6) If only the palette needs to be removed, lift the whole machine from the bottom and set it aside.
Fig. 6.1
Fig. 6.2
6- 3
6. Installation
Advertisement
Table of Contents
