Table of Contents
Advertisement
NH-2700
2) Prepare the new paper roll. Please see the NOTE described below
Roll Guide
NOTE:
1.
Make sure the roll is in its proper roll form. (A deformed roll may cause jamming problems)
2.
When replacing the new roll, make sure the end of the roll paper has a clean cut. (See the below
figure.)
Lower Guide
Roll Guide
Upper Guide
3) Remove the roll guide by carefully pulling it off.
4) Add the receipt paper into the rod and then
insert the roll guide tightly again to fix it.
5) The shiny side of the paper should be faced up
to be printed properly and the metallic tension
guide should be surrounded with paper to reduce
the tension during feeding.
6) Insert the leading edge of paper between lower
guide and upper guide of the receipt printer
slowly. When the machine is initialized, the
paper is going to start feeding.
4 - 33
4. Operating Instructions
Advertisement
Table of Contents
