Table of Contents
Advertisement
NH-2700
Error Code
CS1A or CS1B sensor detects note in delivery
4002300
path before/after CDU dispenses
Detect CS13 after initialization / Detect CS13
40028
before dispensing.
CS13 sensor detects note in delivery path
4002800
before/after CDU dispenses
Detect CS13 & CS1A after initialization / Detect
40029
CS13 & CS1A before dispensing.
CS1A or CS13 sensor detects note in delivery
4002900
path before/after CDU dispenses
Detect CS13 & CS1B after initialization / Detect
4002A
CS13 & CS1B before dispensing.
CS1B or CS13 sensor detects note in delivery
4002A00
path before/after CDU dispenses
Detect CS13 & CS1A & CS1B after initialization
4002B
/ Detect CS13 & CS1A & CS1B before
dispensing.
CS1A, CS1B or CS13 sensor detects note in
4002B00
delivery path before/after CDU dispenses
(INITIAL / DISPENSE) Motor Constant Speed
40030
Error
4003000
Failed in checking the main motor echo
40031
(INITIAL / DISPENSE) SOLENOID ECHO Error
Failed in checking the reject gate solenoid
4003100
echo
Failed in checking the present gate solenoid
4003200
echo
Description
7- 9
Trouble shooting
1. Remove note from the CDU delivery path.
2. Clean CS1A and CS1B
1. Remove note from the CDU delivery path.
2. Clean CS13
1. Remove note from the CDU delivery path.
2. Clean CS1A and CS13
1. Remove note from the CDU delivery path.
2. Clean CS1B and CS13
1. Remove note from the CDU delivery path.
2. Clean CS1A, CS1B and CS13
1. Initialize
2. Check Main Motor Encoder Slit
3. Initialize after Power On/Off
4. Check Encoder Sensor CS8 BRKT
5. Check CS8 Sensor Cable
6. Change Main Motor Encoder Slit Sensor CS8
7. Appendix
Advertisement
Table of Contents
