Table of Contents
Advertisement
NH-2700
5. Operator Function
How to Enter the Character
A. The Keypad Character Table will appear on the bottom of the screen in all keypad input screens.
B. F1 key gives the option for ALPHA or NUMBER, Table mode. Default is NUMBER.
C. F3 key gives the option for Upper or Lowercase characters. It is valid only in the ALPHA mode.
Default is Uppercase.
D. The input of characters is limited to the space provided.
E. Key can be changed whenever you press it to choose proper character. For example, when key "1"
is pressed once it is "SPACE", pressed twice it is "Q", pressed third time it is "Z" in case of the Alpha
mode. When the desired character is selected, press ENTER.
F.
,
keys move the cursor position in the ALPHA or NUMBER mode. In the TABLE mode
,
keys are used to select the character.
G. F2 key is used to clear the whole screen and returns the cursor to its initial position.
H. F4 key and CLEAR key in pinpad are used to clear the current line.
I. F5 key is used to save the current changes.
J. F6 key and CANCEL key in pinpad are used to exit. (If you didn't press F5 key after changing, the
changes will be ignored.)
K. F7 key is used to move the cursor position UP.
L. F8 key is used to move the cursor position DOWN.
5- 17
Advertisement
Table of Contents
