Table of Contents
Advertisement
MX-4000W
6.2 System Installation
Unpacking
1. Cut the straps that are fastened around the box with a knife. (See Fig.6.1 below) Be careful when
cutting the straps.
2. Use an appropriate tool to remove the nails from the palette. (See Fig.6.2 below)
3. Remove the lid, then box from the top. Do not discard the packaging materials until you have
verified any shipping damage claim. Contact your distributor immediately if you see any shipping
damage. Store the box in a safe place to re-use or discard of appropriately.
4. Verify the contents carefully with the packing list to be sure all items listed are included. Notify your
distributor of any shortages.
CAUTION:
In order to move the machine and place it in a proper location, you should
seek the help of professionals trained in moving heavy equipment.
Fig.6.1
6- 6
6. Installation
Fig.6.2
Advertisement
Table of Contents
