HYOSUNG NH-2700 Operator's Manual page 16

NH-2700 3. Hardware Specifications
Receipt Printer Slot
After the consumer uses the ATM, the receipt printer prints the transaction information on a form. The
ATM presents the form through the receipt printer slot on the upper fascia.
Card Reader Slot
The consumer inserts (to begin transactions) and removes an card from the card reader slot.
Dip Card Reader
The dip card reader is a manually operated device mounted directly to the ATM fascia. The consumer
inserts an ATM card in the card entry slot and then removes the card to begin the transaction. The dip
card reader can read magnetic stripe cards and memory chip cards. The dip card reader cannot
retract, capture, or retain cards.
Cash Dispenser Shutter
When the consumer requests cash, it is presented through the cash dispenser shutter in the lower
fascia.
Consumer keypad (Encryption Pin Pad)
During the transaction sequence, the ATM prompts the consumer to use the consumer keypad to
enter transaction information. The 16-key keypad uses a security module and encrypting PIN pad
technology to secure the information entered by the consumer at the keypad.
Function keypads
The function keypads are made up of four keys mounted on each side of the consumer display. The
consumer selects from the choices shown on the consumer display and presses the corresponding
function key.
Consumer Display
The consumer display welcomes the consumer and provides instructions for performing transactions
at the terminal. An optional touch screen display eliminates the need for function keypads.
3- 4