Table of Contents
Advertisement
NH-2700
6. Installation
6. Installation
6.1 Installation Information
Installation condition and space
Following conditions should be met before installing equipment.
1) Temperature while operating should be between 41°F - 104°F.
2) Relative humidity while operating should be between 25% < RH < 85%, Non-Condensed.
3) Avoid locations where intense direct light is reflected off the LCD screen.
4) Avoid locations where strong static electricity can occur.
5) Avoid placing the product next to equipment that produces electromagnetic waves. It could interfere
with data transfer.
6) The floor must allow easy wheelchair access from the front or the side.
7) Space required for servicing the machine should be considered before installation.
Tools required for installation
In order to move the machine and place it in a proper location, you should seek the help of
professionals trained in moving heavy equipment.
Following tools are needed to install the machine.
1) Wire cutter
2) Lifter
3) Screw driver (Flat, Phillips)
4) Wrench (Spanner)
5) Leveling tool
6- 2
Advertisement
Table of Contents
