HYOSUNG NH-2700 Operator's Manual page 215

NH-2700
Error Code
97912XX DEV_SPR Time Over Error
97922XX DEV_SPR FATALERROR (WARNING)
Open lever detected before executing
A010100
command
Printer thermal head overheated while
A010200
executing command
A010300 Paper jam detected before executing command Remove any jammed paper from the printer.
Paper setting error detected before executing
A010400
command
Paper check error detected before executing
A010500
command
Paper cutter software check error detected
A010800
before executing command
A080100 Open lever detected while executing command
A080200 Receipt printer head overheated while printing
A080300 Paper jam detected while executing command
Paper setting error detected before executing
A080400
command
A080500 Paper check error in doing command
Paper cutter software check error detected
A080800
while executing command
No response detected for 30 seconds after
ADN0100
sending command
No response detected for 30 seconds after
ADN0F00
sending command
ADN1100 No response detected after 3 retries
No response detected between ENQ-ACK after
ADN1200
5 retries of ENQ
No response detected after 5 retries because
ADN1300
of timeout between STX-BCC interval
Description
7- 4
Trouble shooting
1. Reboot ATM
2. Call your attendant
1. Reboot ATM
2. Call your attendant
Close the feed lever.
Check the thermal printer head and change if
necessary.
Remove and re-install the receipt paper.
Remove and re-install the receipt paper.
Check for and remove any jammed paper.
Remove any jammed paper.
Check the thermal printer head and change if
necessary.
Remove and re-install the receipt paper.
Remove and re-install the receipt paper.
Remove any jammed paper.
Check for and remove any jammed paper.
Check cable and connection between the CE and
printer.
Check cable and connection between the CE and
printer.
Check cable and connection between the CE and
printer.
Check the cable and connection between the CE
and printer.
Check cable and connection between the CE and
printer.
7. Appendix