Table of Contents
Advertisement
NH-2700
5.1.2 When an Error Occurs
When you try to enter Supervisor Mode or go into IN SERVICE MODE from supervisor menu, the
screen below will be displayed if there is any ERROR.
Press DEVICE INITIALIZE button, if the error is caused by a device so it can be cleared by initializing.
Press OPERATOR FUNCTION button, if you have to set up any information to clear the error. And set
up the information which is missed.
NOTE: If the machine goes out of service, the error code will not always appear on the screen. If you
do not see an error code, enter operator function and go to reports. Look in the error summary
for error codes.
5- 15
5. Operator Function
Advertisement
Table of Contents
