Table of Contents
Advertisement
NH-2700
2) Allow the battery and it's attached leads to drop down and out of the battery compartment. If it does
not drop, gently pull on the battery until it does.
3) The connector is easily removed by unsnapping it from the two terminals on the top of the battery.
Never Pull on the Battery Leads
4) Connect a new 9-Volt Alkaline battery to the battery clip.
5) Push the battery and the leads completely up into the battery compartment.
6) Install the battery cover by placing one side of the cover in position and then pressing the other side
into position with your finger.
Fig. 4.11 Changing Battery #1
4 - 10
4. Operating Instructions
Advertisement
Table of Contents
