HYOSUNG NH-2700 Operator's Manual page 106

NH-2700 5. Operator Function
5.6.6.2 FLICKER
This FLICKER contains ALL FLICKER SENSOR, EPP FLICKER, CDU FLICKER, SPR FLICKER
and MCU FLIKCER. Please press each button on this menu to change test mode ON, OFF or
FLICKING. To go back to the previous screen, press the CANCEL key in pinpad.
Accessing the SENSOR
1) Select DIAGNOSTICS in the OPERATOR FUNCTION.
2) Select AUXILIARY UNIT in the DIAGNOSTICS menu and then select FLICKER in the
AUXILIARY menu.
3) Select any button to test EPP, CDU, SPR, MCU in each or ALL FLICKER..
5.6.7 AGING
The AGING function is only used at the factory.
Accessing the AGING
1) Select DIAGNOSTICS in the OPERATOR FUNCTION.
2) Select AGING in the DIAGNOSTICS menu.
3) All units will be tested unlimitedly. When you press CANCEL key, the testing will be stopped.
5- 46