Table of Contents
Advertisement
NH-2700
Error Code
RMS Phone Number is not inputted in RMS
F000E00
Enable
F000F00
Terminal Number is not inputted
F001000
Routing ID is not inputted
F001100
Master Key Serial Number is not inputted
F001200
Non-Cash Type text is not inputted
F001300
Parameter is not properly set
F001400
NVRAM Failure
F001500
ATM Serial No. Empty
F001600
Default master password was not changed
F001F00
Machine serial number is not set
F002F00
Host type is not set
F003F00
Communication ID invalid (only triton)
F004F00
EPP(Pinpad) key mode is invalid
F005F00
Denomination is invalid
F006F00
Failed Host Connection!
F007F00
Invalid Exchange Rate
F00FF00
Failed to write Journal
FFFFFFF
NVRAM is broken
Description
7- 33
Trouble shooting
Enter RMS phone number.
Enter Terminal number. (required)
Enter Routing ID. (required)
Enter Master key serial number.
Enter Non-cash type text.
Check proper parameters in setting.
Try to clear NVRAM
Enter ATM serial number. (required)
Check serial number. 2. Set serial number.
Check host type. 2. Set host type.
Contact to technician support team .
1. Check modem cable
2. Contact to technician support team
1. Check modem cable
2. Contact to technician support team
1. Check Host Connection.
2. Contact to technician support team.
Download the exchange rate from RMS
1.Back up journal to thumb drive
2.Clear journal
3.Reboot ATM
1. Reset Master Password
2. Clear NVRAM
7. Appendix
Advertisement
Table of Contents
