Table of Contents
Advertisement
NH-2700
Physical Installation
To install NH-2700 ATM, perform the following steps.
1) Place the " Anchor bolts locate sheet " at the place where the machine is to be installed. (refer to
Fig. 6.3)
2) Place the system on a flat surface. Be careful when opening the top or bottom of the machine
because it can be off balance
3) Place the Anchor nuts into the ground according to the anchor bolts locate sheet.
(4 places)
4) Place NH-2700 ATM on top of the sheet.
5) Open the Security cover with the key provided.
6) Using the supplied combination (factory preset at 50-25-50 for dial lock & cencon lock and 1-2-3-4-
5-6 for electronic lock) open the Security Door.
This combination should be changed as soon as possible. Refer to Chapter 4 for instructions on
changing the lock combination.
7) After the anchor nuts are in place according to the anchor holes on the bottom of NH-2700 ATM,
tighten the anchor bolts tightly.
6- 4
6. Installation
Advertisement
Table of Contents
