HYOSUNG NH-2700 Operator's Manual page 223

Hide thumbs Also See for NH-2700:
Table of Contents

Advertisement

NH-2700
Error Code
4004700
1 cassette mis-feed error (Separated rejection)
Error if the number of dispensed notes is not
4004800
matched to the requested
(DISPENSE)
40049
requirement by "0".
Error to dispense 0 sheets to be required
4004900
(Separated rejection
4004A
(DISPENSE) Jam during dispensing.
4004A00
Error of note jam (Separated rejection)
Continuous 3 times error if note is long
4004B00
(once tried, twice retried)=>Separated rejection
In case the number of notes detected outlet
4004C00
sensor(CS13/ LS2) is more than that of notes
detected on CS1A,B sensor
(DISPENSE)
4004D
operation.
Error of being removed 1st cassette before
4004D00
separate rejection
Error of being removed 2nd cassette before
4004E00
separate rejection
(DISPENSE) Received the required number of
40051
notes 150 or more.
Received a request for over 150 notes
4005100
dispensing on the Cash Dispenser from the
upper unit.
The remaining notes at the sensor in front of
4005200
the CST after dispense operation (CS1A,
CS1B)
Description
Received
the
number
Cassette
separation
1. Check notes in 1 Cassette
2. Check Sensor(CS6) Poll
3. Check jam in 1 cassette and reload
4. Remove dust in CS1A, CS1B Sensor
5. Exchange 1 cassette box when there are many
error
1. Check CS13 sensor (note jam and dust)
2. Replace CS13 sensor
of
1. Check received command
2. Check communication cable
3. Check Cash Dispenser Firmware Version
1. Remove jammed notes on Cash Dispenser
return path
2. Remove dust in CS1~CS4 sensor
3. Install after rearranging notes in cassette
1. Check state of notes in reject box
2. Rearrange notes in cassette
3. Check Index of notes
4. Check foreign objects in the main motor encoder
slit
5. Replace the CS8 encoder slit sensor
1. Check CS1 sensor
2. Reconnect CS1 sensor
before
1. Set cassette #1 correctly
2. Check the catcher inside cassette #1 guide
1. Set cassette #2 correctly
2. Check the catcher inside cassette #2 guide
1. Check the Cash Dispenser received command
2. Check the abnormal communication cable.
3. Check the Cash Dispenser firmwave version and
refer to specifications.
1. Remove the remaining notes at a sensor in front
of the CST
2. Realign notes in the cassette
3. Check abnormal clutch.
4. Check abrasion of the cassette box pick unit.
7- 12
7. Appendix
Trouble shooting

Advertisement

Table of Contents
loading

Table of Contents