Table of Contents
Advertisement
WPS-300-CUB-IP Installation Manual
3. Package Contents
•
(1) WPS-300-CUB-IP Camera
•
(1) Quick Start Guide
•
(1) WPS-ACC-PWR-M Power Adapter
•
(1) Mounting Base Assembly
NOTE: A POWER SUPPLY IS NOT INCLUDED WITH THIS CAMERA. The PS-12DC-1A, WPS-PS multiple output power supply
or a Power over Ethernet (PoE) switch is recommended.
4. Required Items for Installation
The following items are required during the installation of a Wirepath™ IP camera. Prepare all parts and tools in advance to ensure
that the installation can be performed smoothly.
•
Local Ethernet network installed
•
All cameras to be installed in the system
•
PoE Ethernet equipment or power supplies and wiring to power cameras
•
Network connection at each camera location
•
Access to a PC connected to the local network
•
Static IP address to assign to the camera
•
Additional access information for network equipment:
o
Router / Switch Details – Contact the network admin to obtain access to equipment settings.
o
Admin Rights – Required to setup the network and port forwarding for remote access.
o
Default Gateway
o
Subnet Mask
o
DNS Address
•
Recommended for mounting cameras and wiring:
o
Hand tools
o
Drill (May be needed for mounting the camera)
o
Extra connectors for terminating cables on the job
8
Advertisement
Table of Contents
