Safety Instructions - Wirepath Surveillance WPS-300-CUB-IP Installation Manual

Ip cube camera
Table of Contents

Advertisement

WPS-300-CUB-IP Installation Manual

1. Safety Instructions

1.
Read and follow all instructions and warnings in this manual. Keep for future reference.
2.
Install according to manufacturer's instructions.
3.
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers)
that produce heat.
4.
Only use attachments/accessories specified by the manufacturer.
5.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as when the power-supply cord or plug is damaged, does not operate normally, or has been dropped.
6.
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.
CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRICAL SHOCK.
DO NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
When viewing this document electronically, references to other sections are formatted to stand out. Click on a reference to navigate
to the section. Table of Contents entries may also be clicked to link to sections for faster navigation.
Example: (Cross-reference in one section to another part of the manual) For more information see section
Example: (Hyperlink to a website, will open in a new browser window) Go to www.SnapAV.com.
2
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
2.
Introduction.

Advertisement

Table of Contents
loading

Table of Contents