Introduction; Features - Wirepath Surveillance WPS-300-CUB-IP Installation Manual

Ip cube camera
Table of Contents

Advertisement

2. Introduction

Thank you for purchasing a Wirepath™ IP Surveillance camera. The WPS-300-CUB-IP is an indoor cube-style camera meant for
mounting to any wall, ceiling or surface, for easy monitoring over a web or smartphone interface.
We recommend that this document be read in its entirety before proceeding with system design, installation, or operation of the
camera.

2.1. Features

1/2.7" 2MP CMOS Sensor
Advanced CMOS sensor provides improved picture quality over a typical CCD sensor. Supports full 1080p up to 1920x1080 at
30FPS.
Adaptable Mounting Options
The mounting base can be attached to the camera in a number of ways for mounting to any surface, even flat on a shelf or
ledge. Additionally, the mounting base threads into the camera using common 1/4"-20 threading for use with other mounts.
H.264/ MJPEG Quadruple Stream Optimization
Supports up to 4 simultaneous streams of compression typically used for the following situations:
o
High Res stream optimized for NVR Record or Local Network viewing
o
Lower Res stream optimized for Remote viewing
o
Lower Res stream optimized for Control Systems (same res as Stream 2)
o
Low Res stream for Mobile Viewing
IR up to 26 ft
True Day/Night (IR Cut Filter)
For more accurate, vivid color reproduction during daytime use, an IR Cut filter is automatically moved over the lens to block
unwanted IR. At night, the filter is removed to deliver maximum visibility and clear IR illumination.
Advanced Image Processing
Advanced DSP (Digital Signal Processor) to improve image quality including:
o
Sense Up: Automatically slows the shutter speed to improve image quality in low light.
o
D-WDR (Digital Wide Dynamic Range): Provides clearer images and even lighting in applications that are simultaneously
bright and dark. This is particularly useful in areas with windows and lots of natural light.
o
2D and 3D Digital Noise Reduction (DNR): Intelligently scans the image and reduces noise in low-lux conditions for a
cleaner, crisper image.
Privacy Mask
Block out sensitive or privileged areas by placing rectangular blocks or "masks" over up to three installer-defined areas.
Power Over Ethernet (PoE IEEE 802.3af)
Camera can be powered by PoE using the same Cat5e/Cat6 cable that connects to the network. No need to pull a 2nd power
cable to the location. Compatible with all PoE network switches that support PoE IEEE 802.3af and PoE power injectors.
Edge Storage
The camera supports microSD cards (up to 32GB, card NOT included). Images, short recordings and logs can be stored on a
microSD installed into the camera. This is useful as a backup if the network connection to the NVR is lost.
Alarm Input and Output
1 In / 1 Out, transistor contact closures
ONVIF
© 2014 Wirepath Surveillance
WPS-300-CUB-IP Installation Manual
7

Advertisement

Table of Contents
loading

Table of Contents